SQ-7
Allen & Heath - SQ-7 Digital Mixer 48 Channel

Allen&Heath - SQ-7

Prix FFWD 6 125 €
ALLEF1885D
Sur commande

Contactez-nous
Réglez de manière sûre et sécurisée par Ingenico ou virement bancaire
Réglez de manière sûre et sécurisée par Ingenico ou virement bancaire

 

SQ-7 is the 33-fader flagship console in the SQ series, powered by Allen & Heath’s revolutionary 96kHz XCVI FPGA engine. Created to excel in demanding scenarios such as AV, corporate events, live productions and houses of worship, SQ-7 offers pristine high-resolution audio quality and an ultra-low latency of < 0.7ms. The console features 32 exceptional onboard mic preamps, plus 8 stereo FX engines with dedicated stereo return channels and access to the renowned RackExtra FX library. SQ is a natural choice for in-ear monitor setups, providing 12 stereo mixes (configurable as groups or auxes), whilst Automatic Mic Mixing makes it an excellent choice for conferences, panel talks and more.

96kHz XCVI Core

SQ is driven by Allen & Heath’s 96kHz XCVI FPGA engine, delivering exceptional high-resolution audio quality, ultra-low latency of < 0.7ms and variable bit depths for optimised dynamic range. XCVI is the next-generation foundation that allows SQ to handle high channel counts at 96kHz, with massive mix headroom thanks to a 96bit accumulator, and the sheer power to embed our acclaimed DEEP plugins into all 48 input channels and all mixes.

DEEP processing ready

SQ’s DEEP processing architecture allows owners to hand-pick boutique compressor and preamp emulations to suit their style and needs. DEEP plugins can be embedded directly within the mixer’s inputs and mix channels, all without adding system latency or setup hassles.

The Ultimate IEM Mixer

With no less than 12 stereo mixes and super-low latency, and both parametric and graphic EQ on every mix, SQ-7 is the perfect companion for in-ear monitoring setups. SQ’s airline-friendly compactness and rugged build quality mean there’s no reason to gamble on house monitor consoles again.

Packed with I/O

As the largest model in the SQ series, SQ-7 also packs the highest number of onboard preamps and built-in output sockets, and being SQ, everything is freely and individually patchable. There are 32 pristine XLR mic or line inputs, along with a talkback input that can serve as an extra input when needed. There are also 3 stereo line inputs that can be used as mono inputs, two using ¼” TRS jacks, and one on a 3.5mm mini jack for convenience. Any combination of direct outs, FX or Mix outputs can then be routed at will to the SQ-7’s 16 XLR, 2 TRS jack and stereo AES digital outputs.

Expandable up to 48 mics

Thanks to its SLink intelligent port, SQ-7 can be expanded up to a total of 48 mic inputs via a family of 96kHz and 48kHz rack and stage box expanders (e.g. AB168, AR2412, AR84 and DX168), making it a flexible solution for owners of other Allen & Heath digital systems. You can even connect to another SQ, Qu or dLive system for two way audio patching.

Dante, Waves and more

SQ is the centrepiece of a growing ecosystem of apps, expanders, audio networking, personal mixers and more, allowing you to connect, adapt and expand to your heart’s content. It’s compatible with leading audio networking standards too – add an audio networking card such as Dante or Waves to SQ’s I/O port and you’re ready to integrate with installed systems, provide a digital FoH / Monitor split and more.

Flexible multitrack recording

The integrated SQ-Drive makes it quick and easy to capture a 96kHz multitrack or stereo recording of the show direct to a USB key or drive. No software setup, no soundcard driver issues and no extra laptop to bring to the performance. SQ-Drive is also a smart way to manage walk-in music.
Also provided is a built-in 32×32 96kHz audio interface for multitrack recording, backing tracks or virtual soundcheck applications. The interface is Core Audio and ASIO compliant and comes complete with MIDI and DAW control capabilities.

Advanced AMM

SQ-7’s advanced automatic mic mixers (AMM’s) make it a natural choice for mixing conferences, panel talks and TV shows. They’re fully integrated in the mixer too, with no extra latency, so you don’t need to route the audio to an internal DSP rack or an external plugin system. Two fully independent 24 channel AMM’s can be utilised for two separate zones or combined into a single 48 channel AMM for larger events.

Designed for the pro

We know that the live environment can be tough on gear – that’s why we devised our most punishing regime of testing and retesting yet for SQ. From its 3-tier, all metal chassis to its extruded aluminium light bar, SQ has tremendous strength and rigidity underlying its good looks.

The Mixing Experience

We think that you should decide how the mixer operates, not the other way around. That’s why we’ve packed SQ with options that let you design your own workflows. Channels and mixes can be individually dragged and dropped to any strip, with custom naming and colour coding on the displays, so you’re in full control of the layout. SQ-7 features assignable 16 SoftKeys and 8 Soft Rotaries with LCD displays, so you get to choose which functions you always want at your fingertips. Each strip features our patented Chromatic Channel Metering system, giving at-a-glance level indication using variable brightness and colour. A ‘channel to all’ mix button instantly accesses all send levels and assignments for the selected channel.

SQ MixPad App

The SQ MixPad app is available for free on iOS and Android platforms, providing wireless control of the main mixing functions. This enables the engineer to mix from different listening positions, set up monitor mixes from the stage, or just add extra local control.
All you need is an iPad or Android device and a wireless router.

Features

  • 96kHz FPGA processing
  • 48 Input Channels
  • DEEP Processing ready
  • 33 Faders / 6 Layers
  • 12 Stereo mixes + LR
  • 3 Stereo Matrix
  • 8 Stereo FX Engines + dedicated stereo returns
  • 7” capacitive touchscreen
  • SLink port for remote audio / expansion
  • 64ch I/O Port for audio networking
  • 32×32 USB audio interface
  • SQ-Drive direct recording to USB
  • AES output
  • Chromatic channel metering
  • Integrated LED illumination
  • Dedicated physical controls
  • 16 Assignable SoftKeys
  • 8 Assignable Soft Rotaries
  • Channel LCD displays
Mic/Line Inputs Balanced XLR, fully recallable
Input Sensitivity -60 to +0dBu
Switchable Pad -20dB
Analogue Gain 0dB to +60dB, 1dB steps
Maximum Input Level +30dBu
Input Impedance >5kΩ
THD+N, Unity gain 0dB 0.002% -92dBu (20Hz-20kHz, AES Direct Out, @0dBu 1kHz)
THD+N, Mid gain +30dB 0.003% -91dBu (20Hz-20kHz, AES Direct Out, @- 30dBu INPUT 1kHz)
Phantom Power +48V (+3V / -2V)
Stereo Line Inputs
ST1, ST2 connectors Balanced, 1/4" TRS jack
ST3 connector Unbalanced, stereo 3.5mm Mini Jack
Input Sensitivity (ST1, ST2 / ST3) Nominal +4dBu ST1, ST2 / 0dBu ST3
Trim +/-24dB
Maximum Input Level (ST1,ST2 / ST3) +22dBu / +18dBu
Input Impedance >7kΩ
XLR Outputs Balanced, XLR
Outputs A and B Balanced 1/4" TRS Jack
Source Patchable
Output Impedance <75Ω
Nominal Output +4dBu = 0dB meter reading
Maximum Output Level +22dBu
Residual Output Noise -90dBu (muted, 20Hz-20kHz)
AES Digital OutputBalanced XLR 2 channel,
96kHz sampling rate (Default with SRC Bypassed)
Switchable output sample rates,44.1kHz/ 48kHz/ 88.2kHz/ (96kHz)
2.5Vpp balanced terminated 110M
SLink Neutrik EtherCON (RJ45)
dsnake mode (48kHz devices) 64 channels assignable, compatible with AR2412, AR84, AB168, ME, Qu
dx mode (96kHz devices) 32 channels assignable, compatible with DX168
gigaACE (96kHz devices) 128 channels assignable, compatible with dLive, SQ and DXHub
Inputs Fully Patchable
Outputs Fully Patchable
Sync/SRC assignable as master audio sync for all modes, SRC 64 channel
I/O Port Multi-channel I/O option module
Inputs Fully Patchable
Outputs Fully Patchable
Sync/SRC assignable as master audio sync
Signal Measured balanced XLR in to XLR out, 0dB gain, 0dBu input
Dynamic Range 112 dB
Frequency Response +0/-0.5dB 20Hz to 20kHz
Headroom +18dB
Internal operating Level 0dBu
THD+N, Mic/Line routed to Main L/R Out Unity gain faders@0dB, 0.006%, -84dBu (20 - 20kHz)
dBFS Alignment +18dBu = 0dBFS (+22dBu at XLR output)
Meter Calibration 0dB meter = -18dBFS (+4dBu at XLR out)
Main Meter Type 2 x 12 segment, fast (peak) response
Channel Meter Type Chromatic Channel Metering, fully programmable colour/brightness
Peak Indication -3dBFS (+19dBu at XLR out), multi-point sensing
Sampling Rate 96kHz
Bit Depth Uses XCVI core custom bit widths in algorithms, up to 96bits
Latency <0.7mS, Local Mic Input routed to Main L/R. (Direct, No Effects)
Operating Temperature Range 0 deg C to 40 deg C (32 deg F to 104 deg F)
Mains Power 100-240V AC, 50/60Hz
Max Power Consumption SQ-5/SQ-6/SQ-7 75W / 90W / 110W
Faders 100mm motorised
Touch Screen 7" Capacitive, 800 x 480 resolution, 24 bit RGB
SoftKeys 8 (SQ-5), 16 (SQ-6, SQ-7)
SoftRotarys 4 (SQ-6), 8 (SQ-7)
Mute Groups / DCA Groups 8 / 8
Network TCP/IP Ethernet for MIDI and Control
MIDI TCP/IP and USB B
Footswitch Single or Dual, Momentary or Latching
Source
CH1-48 Fully patchable
USB Global Source SQ-Drive or USB B Streaming
Polarity Normal/Invert
Trim -24 to +24dB
High Pass Filter 12dB/octave 20Hz – 2kHz
Insert (Pre EQ/Comp) Fully Patchable
Delay Up to 341ms
Gate Patchable Sidechain
Sidechain filter Hi-pass (20-5k), band-pass (120-10k), Lo-pass (120-20k)
Threshold / Depth -72dBu to +18dBu / 0 to 60dB
Attack / Hold / Release 50µs to 300ms / 10ms to 5s / 10ms to 1s
PEQ 4-Band fully parametric, 20-20kHz, +/-15dB
Band 1, Band 4 Selectable Shelving (Baxandall), Bell
Band 2, Band 3 Bell
Bell Width Variable Q, 1.5 to 1/9th octave
Compressor Patchable Sidechain
Sidechain filter Hi-pass (20-5k), band-pass (120-10k), Lo-pass (120-20k), Q=1
Threshold / Ratio -46dBu to 18dBu / 1:1 to infinity
Attack / Release 30µs to 300ms / 50ms to 2s
Knee Soft/Hard
Detector response Peak/RMS switchable
Parallel Path Compression dry/wet -infin to 0dB
Channel Direct Out Follow Fader, Mute, Mute Group, DCA (global all ch)
Source select Post-Preamp, Post-HPF, Post Gate, Insert Return,Post PEQ, Post Comp, Post Delay
trim -infin to 10dB per channel
Insert (Pre EQ/Comp) Fully Patchable
Delay Up to 682ms
GEQ 28 bands 31Hz-16kHz, +/-12dB Gain, Constant 1/3 oct
PEQ As Input PEQ
Compressor As Input Compressor
Internal FX 8 x RackFX engine, Send>Return or Inserted (4 dedicated fx bus)
Types SMR Reverb, StereoTap Delay, Gated Reverb, ADT, BlueChorus, Symphonic Chorus, Flanger, Phaser
8 dedicated Stereo FX returns Fader, Pan, Mute, Routing to Mix/LR, 4-Band PEQ
PAFL PFL or stereo in-place AFL, 0 to -24dB Trim, PAFL
Delay Up to 682ms
Talkback dedicated input, Assignable to any mix, Gain, Pad, 48V, 12dB/oct HPF
Signal Generator Assignable to any mix, Sine/White/Pink/Bandpass Noise
RTA 31-Bands 1/3 octave 20-20kHz, follows PAFL source
SQ-Drive USB A
Stereo Record 2 channel, WAV, 96kHz, 24-bit, source fully patchable
Stereo Playback 1/2 channel, WAV, 44.1, 48, 96kHz 16,24-bit, source fully patchable
Multitrack Record 16 channel, WAV, 96kHz, 24-bit, track sources fully patchable
Multitrack Playback 16 channel, WAV, 96kHz, 24-bit fully patchable
USB Audio Streaming USB B, Core Audio compliant, ASIO/WDM for Windows
Send (upstream) 32 channel, 96kHz, 24-bit
Return (downstream) 32 channel, 96kHz, 24-bit
AMM 2x 24ch or 1x 48ch, freely assignable
Mode Gain Sharing
Sidechain Filter HPF / LPF 12dB/octave 20Hz – 5kHz / 120Hz - 20kHz
Priority -15dB to +15dB per channel
Width x Depth x Height
SQ-5
Desk mounted 440 x 514.9 x 198 mm (17.3" x 20.3" x 7.8")
Packed in shipping box 610 x 680 x 360 mm (24" x 26.8" x 14.2")
Unpacked weight 10.5 kg (23.1 lbs)
Packed weight 14 kg (30.9 lbs)
SQ-6
Desk mounted 638 x 514.9 x 198 mm (25.1" x 20.3" x 7.8")
Packed in shipping box 820 x 680 x 360 mm (32.3" x 26.8" x 14.2")
Unpacked weight 13.3 kg (29.3 lbs)
Packed weight 17.3 kg (38.1 lbs)
SQ-7
Desk mounted 804 x 514.9 x 198 mm (31.7" x 20.3" x 7.8")
Packed in shipping box 960 x 685 x 360 mm (37.8" x 27" x 14.2")
Unpacked weight 17.8 kg (39.3 lbs)
Packed weight 21.9 kg (48.3 lbs)

Produits associés

12 autres produits dans la même catégorie :