Building on over 20 years of expertise in analogue console heritage, Nero has been designed to give you powerful control over your monitoring. Featuring a comprehensive range of I/O, console style monitor control, Precision Matched Attenuation Technology and more... Nero will quickly become the core of your studio.
Inputs
As your studio grows it becomes harder to control. Nero enables you to centralise, connect and control all your monitoring needs from your desktop using Nero’s array of stereo inputs.
Outputs
Reference your mixes on up to three sets of speakers, independently set and match volume for all speakers and audition and assign your sub to any monitor path. Nero also provides one dedicated monitor grade headphone amp and three foldback grade headphone amps, making sure you’re ready to take on the loudest of sessions with crystal clear headphone mixes.
Assignable Sub
Easily assign a sub to activate when switching to a monitor path of choice but maintain the ability to switch it on and off without losing your saved preset. Nero also lets you audition the sub on any alternative set of speakers without forcing you to assign it permanently.
Smart Touchpoints
Smart Touchpoints enable you to customise your workflow on the fly. Easily route and configure Nero’s outputs and monitor controls to create monitoring combinations that suit your needs. Simply hold down a Smart Touchpoint to put it into setup mode, select your routing options and press it again to save.
Precision Matched Stereo Volume Control
Nero perfectly matches the volume of the left and right channels of your stereo signal using Audient’s custom Precision Matched Attenuation Technology. Unlike other monitor controllers, this prevents any deviation in volume between your left and right monitors or unbalancing of your stereo image, enabling you to monitor accurately and mix with confidence.
Console Style Monitor Control
Utilising Audient’s vast experience in implementing monitor control in both recording consoles and desktop controllers, Nero features David Dearden designed circuitry and a range of flexible monitor controls including dedicated talkback, cut & dim along with polarity, mono, speaker select and cue mix monitoring.
User Defined Dim
Set your attenuation using the volume knob
Latching buttons
Activate Dim, Mono or Talkback with either a tap (latch) or a tap and hold
Tactile Speaker Select
Audition your mixes by quickly switching between monitors
Cue Mix Monitoring
Reference what your artist is hearing and fix problems fast
Sum and Difference
Use this classic trick to quickly hear your stereo information
Smart Mono Mode
Permanently assign a mono speaker without preventing mono functionality on other sources
- 10 in/4 out USB interface
- Classic Valve Preamp with 12AX7 Valve
- 3 Band Tone Control
- Two notes Power Amp and Cab Simulation
- Re-amp Output
- 2x Audient Console Mic Pres
- High Performance AKM AD/DA Converters
- ADAT Input for Expandability
BALANCED LINE INPUTS: | |
---|---|
NOMINAL INPUT LEVEL: | +4dBu |
MAX INPUT LEVEL: | +18dBu |
CMRR: | > 50dB |
MIC EIN: | -128dBu |
CMRR: | >80dB @ 1kHz |
UNBALANCED AUX INPUTS: | |
NOMINAL INPUT LEVEL: | -10dBV |
MAXIMUM INPUT LEVEL (minimum trim): | +27dBu |
TRIM RANGE: | ±12dB |
DIGITAL INPUTS: | |
INPUTS: | TOSLINK and Coaxial |
FORMAT: | S/PDIF |
SAMPLE RATES: | 44.1kHz - 192kHz |
BIT DEPTH: | up to 24bit |
TALKBACK INPUTS: | |
MAXIMUM IPUT LEVEL: | 2dBu |
GAIN: | 4-44dB |
PHANTOM POWER: | +48V |
SPEAKER OUTPUTS: | |
MAXIMUM OUTPUT LEVEL: | +12dBu |
HEADPHONE OUTPUTS: | |
MINIMUM LOAD: | 12.8Ohms |
PERFORMANCE | |
SPEAKER OUTPUTS: | |
THD+N: | 0.0015% 0dBu 1k input |
SNR: | 100dBu |
CROSSTALK (SPEAKERS): | >100dB |
FREQUENCY RESPONSE: | 20Hz - 22kHz ±0.5dB |
ATTENUATION AT MIN VOLUME (SPEAKER OUTPUTS): | >110dB |
DAC: | |
THD+N: | <0.0017% |
DYNAMIC RANGE: | 113dB |
FREQUENCY RESPONSE: | 20Hz - 22kHz ±0.5dB |
HEADPHONE OUTPUTS: | |
THD+N @ 0dBu (output level): | 0.009% - 30Ohm |
0.009% - 60Ohm | |
0.008% - 600Ohm | |
PEAK POWER OUTPUT: | 90mW - 30Ohm |
56mW - 60Ohm | |
7.35mW - 600Ohm | |
CROSSTALK: | >62dB |
ATTENUATION AT MIN VOLUME: | >96dB |
POWER SUPPLY: | 12VDC Centre Positive DC Adapter - 2Amps |
Weight: | Unit: 2kg |
Dimensions: | Unit: 255mm (w) x 75mm (h) x 155mm (d) |