SR605EBKT - SR Series - Black Stained Burst
Ibanez - SR605EBKT,SR Series,Black Stained Burst
Ibanez - SR605EBKT,SR Series,Black Stained Burst
Ibanez - SR605EBKT,SR Series,Black Stained Burst
Ibanez - SR605EBKT,SR Series,Black Stained Burst

Ibanez - SR605EBKT - SR Series - Black Stained Burst

Prix FFWD 905 €
IBAN02ECDN
Sur commande

Quantité limitée
Réglez de manière sûre et sécurisée par Ingenico ou virement bancaire
Réglez de manière sûre et sécurisée par Ingenico ou virement bancaire

 
Rosewood fretboard

Rosewood fretboard

Rosewood provides a well-balanced solid tone with a focused mid range.

Nordstrand™ Big Break pickups

Nordstrand™ Big Break pickups

Nordstrand™"Big Break" pickups cram a meaty split coil into a soapbar-style pickup, producing a full-bodied, powerful, aggressive tonal texture, while still retaining the clarity that's characteristic of single coil tone with noiseless performance.

Accu-cast B500 bridge

Accu-cast B500 bridge

The Accu-cast B500 bridge has adjustable saddles for variable string spacing by +/- 1.5mm, answering every bassist’s specific string spacing needs.

SPECS
neck typeSR5 5pc Jatoba/Walnut neck
top/back/bodyAsh body
fretboardRosewood fretboard Abalone oval inlay
fretMedium frets
number of frets24
bridgeAccu-cast B505 bridge
string space16.5mm
neck pickupNordstrand™ Big Break neck pickup Passive
bridge pickupNordstrand™ Big Break bridge pickup Passive
equaliserIbanez Custom Electronics 3-band EQ w/ EQ bypass switch (passive tone control on treble pot), 3-way Mid frequency switch
factory tuning1G,2D,3A,4E,5B
stringsD'Addario® EXL165 + .130
string gauge.045/.065/.085/.105/.130
hardware colorBlack
NECK DIMENSIONS
Scale :864mm /34"
a : Width45mm at NUT
b : Width68mm at 24F
c : Thickness19.5mm at 1F
d : Thickness21.5mm at 12F
Radius :305mmR
DESCRIPTION :
Guitar Neck Diagram
a: Width of the neck at the nut
b: Width of the neck at the fret position specified by the neck dimension
c: Thickness of the neck at the first fret
d: Thickness of the neck at the fret position specified by the neck dimension
Radius: Radius of the fingerboard
CONTROLS
SR605E's control diagram
DESCRIPTION :
With the bass held in the playing position, there are three small knobs located towards the lower edge of the body. Directionally, from the lower bout towards the neck these knobs control treble boost/cut, mid boost/cut, and bass boost/cut knob. Above these are two larger knobs closer to the bridge. Of these, the knob closest to the end of the body is the pickup balance, and the knob located towards the neck is the volume knob. There are two switches on this bass. The switch closest to the lower edge of the body is a 3-way mid frequency switch. When the switch is in neck position, mid boost peak is at 250Hz. When the switch is in center position, mid boost peak is at 450Hz. When the switch is in bridge position, mid boost peak is at 700Hz. The other switch closer to the middle of the bass is the EQ bypass switch. When the switch is in neck position, the EQ is off. When the switch is in bridge position, EQ is on. When EQ is off, the treble knob works as a passive tone control knob.
FREQUENCY RESPONSE
SR605E's EQ curve diagram
DESCRIPTION :
The bass boost/cut frequency curve has a peak at 20 Hz, the variable width becomes smaller toward the high range, and the variable width becomes zero at about 1000 Hz. The variable range of the peak frequency is approximately ±15 dB. The treble boost/cut frequency curve draws a mountain-shaped curve with a peak at around 10,000 Hz and zero variable range around 100 Hz. The variable range of the peak frequency is approximately ±15 dB. The mid-boost/cut frequency curve creates a bell-shaped curve that peaks at a specific frequency, and the variable range becomes zero near 20 Hz and around 10,000 Hz. The frequency peak can be switched to 700, 450 and 250 Hz. The variable range of the peak frequency is approximately ±15 dB.
OTHER FEATURES
Recommended CaseMB300C MB300C
Recommended Bag
IBB540-BK IBB540-BK

12 autres produits dans la même catégorie :