LiveTrak L-20
Zoom - LiveTrak L-20
Zoom - LiveTrak L-20
Zoom - LiveTrak L-20
Zoom - LiveTrak L-20
Zoom - LiveTrak L-20
Zoom - LiveTrak L-20
Zoom - LiveTrak L-20
Zoom - LiveTrak L-20
Zoom - LiveTrak L-20
Zoom - LiveTrak L-20

Zoom - LiveTrak L-20

Prix FFWD 1 010 €
ZOOMC417BB
Sur commande

Contactez-nous
Réglez de manière sûre et sécurisée par Ingenico ou virement bancaire
Réglez de manière sûre et sécurisée par Ingenico ou virement bancaire

 

The LiveTrak™ L-20 is the new digital console offering everything creators need to mix, monitor, and record complex productions. With 20 discrete audio channels and six individual custom monitor mixes, it’s built for bigger, bolder arrangements.

20 Inputs for Bigger Sound

The LiveTrak L-20 is designed to mix bigger. It features 20 inputs (16 mono mic/line inputs and two stereo inputs), all with independent 3-band mid-parametric EQ. The 16 mono inputs offer stand-alone compressor control.

22 Tracks of Recording

Record 20 discrete channels plus a stereo mix directly to an SD card. The LiveTrak L-20 captures pristine audio in resolutions up to 24-bit/96 kHz.* At -128 dBu EIN with +60 dB maximum input gain, the L-20 is equipped with our quietest and most advanced preamps ever. Mix down finished songs on the L-20 or transfer your discrete tracks to a DAW to perfect later.

*Effects, EQ, overdub, audio interface, and fader modes A-F are not available in 96 kHz.

Create Six Custom Monitor Mixes

With six independent monitor outputs for musicians, each output can have its own custom mix, complete with effects, that can easily be switched from a powerful headphone output, to a balanced line output for stage monitors.

And One for the House

The LiveTrak L-20 features a dedicated 7th output for the FOH engineer. The sound engineer can monitor the main mix and any of the sub mixes, thus adjusting them to the musicians’ satisfaction.

Channel Strip

All 20 inputs include a channel fader as well as dedicated mute and solo buttons. The 16 mono inputs include single-knob compression and gain control. Record or playback individual channels with the "Rec/Play" button.

 

EQ Control

The L-20 provides a smooth 3-band mid-parametric EQ and a variable frequency low-cut for each channel. Use the "Select" button to apply Channel Strip settings to the selected channel.

2 EFX Sends

The L-20 offers 20 built-in effects with adjustable parameters. Choose from delay and reverb effects, then apply them to any channel using two dedicated EFX busses.

Broad Connectivity

The L-20’s combo inputs support XLR or ¼-inch connections. Channels 1-2 offer Hi-Z inputs for electric guitar or bass. Channels 17/18 and 19/20 have TS line connectivity for keyboards and other audio devices, as well as RCA inputs.

Navigation and Display

The LiveTrak L-20’s bright, backlit LCD screen and encoder knob let you access an intuitive menu to create new projects, recall previous projects, and customize your recorder settings.

Slate Mic and Metronome

Use the built-in slate mic to record comments or talk-back. Push the tempo button to program the metronome to your desired tempo.

Transport Controls and Overdub Button

Transport controls include Record, Play/Pause, Stop, Fast Forward, and Rewind. The overdub button allows you to record additional tracks to your current project.

Six Custom Monitor Mixes

The “Fader Mode” buttons allow you to design custom mixes for both the master and monitor outs. For each output, easily switch between a powerful headphone output and a balanced line output for stage monitors.

Headphone Output for FOH

The L-20 includes a dedicated headphone output for front-of-house, enabling them to monitor any of the custom sub mixes as well as the master mix.

Custom Scene Settings

Create and save up to nine different scenes to recall fader position, EQ settings, pan, mute, and more.

NUMBER OF INPUT AND OUTPUT CHANNELS
Inputs Mono (MIC/LINE): 16
Stereo (LINE): 2
Output MASTER OUT: 1
MONITOR OUT: 6
PHONES : 1
INPUTS 1-8
Mono (MIC/LINE) Type: XLR/TRS combo jacks (XLR: 2 HOT, TRS: TIP HOT)
Input gain
PAD OFF: +16 – +60dB
PAD ON: − 10 – +34 dB
Hi-Z ON: +6 – +50 dB
Input impedance
XLR: 3 k Ω
TRS: 10 k Ω /1 M Ω (when Hi-Z ON)
Maximum input level
PAD OFF: 0 dBu (at 0 dBFS)
PAD ON: +26 dBu (at 0 dBFS)
Phantom power
+48 V
Stereo (LINE) Type: TS phone/RCA pin (unbalanced) jacks
Maximum input level : +10 dBu
OUTPUTS
MASTER OUT Type: XLR jacks (balanced)
Maximum output level :+14.5 dBu
Output impedance: 100 Ω
MONITOR OUT A–F (with balanced output) connected to monitor speakers Type: TRS phone jacks (balanced)
Maximum output level: +14.5 dBu
Output impedance: 100 Ω
MONITOR OUT A– F (with unbalanced output) connected to headphones: Type: Standard stereo phone jacks
Maximum output level: 42 mW + 42 mW at 60 Ω
Output impedance: 100 Ω
PHONES Type: Standard stereo phone jacks
Maximum output level: 42 mW + 42 mW at 60 Ω
Output impedance: 100 Ω
BUSES
MASTER 1
MONITOR 6
SEND EFX 2
CHANNEL STRIP
COMP  
LOW CUT 40–600 Hz, 12dB/OCT
EQ HIGH: 10 kHz, ± 15 dB, shelving
MID: 100 Hz – 8 kHz, ± 15 dB, peaking
LOW: 100 Hz, ± 15 dB, shelving
PHASE  
LEVEL METERS
Level segments 12
SEND EFFECTS
Effects 20 types:
EFX 1
Hall 1 (Reverb)
Hall 2 (Reverb)
Room 1 (Reverb)
Plate (Reverb)
Church (Reverb)
DrumAmb (Reverb)
GateRev (Reverb)
Vocal 1 (Delay + Hall Reverb)
Vocal 2 (Delay + Mono Reverb)
Vocal 3 (Delay + Plate Reverb)
EFX 2
Hall 3 (Reverb)
Room 2 (Reverb)
Spring (Reverb)
Delay (Delay)
Analog (Delay)
P-P Dly (Delay)
Vocal 4 (Delay + Room Reverb)
Chorus 1 (Stereo Chorus)
Chorus 2 (Mono Chorus)
Cho+Dly (Chorus + Delay)
RECORDER
Maximum simultaneous recording tracks 22 at 44.1/48/96 kHz
Maximum simultaneous playback tracks 20
Recording format WAV 44.1/48/96 kHz, 16/24-bit, mono/stereo
Recording media 4 GB – 32 GB SDHC cards (Class 10 or higher)
64 GB – 512 GB SDXC cards (Class 10 or higher)
AUDIO INTERFACE
44.1/48 kHz WRecording: 22 channels
Playback: 4 channels
Bit depth 24-bit
Interface USB 2.0
SYSTEM REQUIREMENTS FOR AUDIO INTERFACE MODE
Windows OS: Windows® 7 SP1 or later / 8.1 / 10 (32bit/64bit)
CPU: Intel® Core i3 or faster*
USB: USB 3.0/USB 2.0**
* Operation is not guaranteed with CPUs from Atom, Celeron or Pentium series or CPUs made by AMD.
** Only USB host controllers with Intel Chipsets are supported. Operation is not guaranteed when used with USB hubs or expansion cards.
Mac OS: Mac® OS X 10.11 / 10.12 / 10.13
CPU: Intel® Core i3 or faster
USB: USB 3.0/USB 2.0*
* Operation is not guaranteed when used with USB hubs or expansion cards.
iPhone/iPad OS: iOS 9 / 10 / 11
* Apple Lightning-to-USB Camera Adapter required.
CARD READER
Class Class
USB HOST
Class USB 2.0 High Speed
Sampling frequency 44.1/48/96 kHz
Frequency characteristics 44.1 kHz: −1.0 dB, 20 Hz – 20 kHz
96 kHz: −3.0 dB, 20 Hz – 40 kHz
Equivalent input noise Actual measurements: −128dB EIN (IHF-A) at +60dB/150Ω input
Display LCD with backlight (128×64 resolution)
Power AD-19 AC adapter (DC12V 2A)
Power consumption 24 W maximum
External dimensions 445 mm (W) × 388.4 mm (D) × 82.6 mm (H)
Weight (main unit only) 3.71 kg

12 autres produits dans la même catégorie :