News

Nouveautés

Marques

Magasin

Connexion

SPL - Crimson 3

Prix FFWD 830 €

Référence SPLCVRFNYY

Stock Magasin Sur commande
Stock Internet
Contactez-nous

Réglez de manière sûre et sécurisée par Ingenico ou virement bancaire

Description
Détails du produit

Two Mic Preamps

2 microphone preamplifiers in discrete technology
separate switchable phantom power for condenser microphones
High-pass filter to remove footstep sound and rumble before recording

Two Instrument Preamps
High impedance (Hi-Z) instrument jacks on front side

Talkback

Electret microphone with omnidirectional characteristic
Gain control on the front side

Channel & State LEDs

Traffic light LEDs for the analog inputs
Power (PWR)
Host – Mac/PC, iDevice, Tablet etc. detected
Midi In traffic LED

Analog Monitoring

Inputs & DAW

Monitoring the analog mic/line inputs 1/2 with mono switching
Monitoring the analog instrument/line inputs 3/4
Monitoring the digital workstation inputs 1/2 & 3/4

Source & Digital In

Monitoring the three analog sources or feeds
Monitoring a digital source
Selection for digital input channels 1/2 & 3/4

Speakers | Artist Mode | Talk

Toggling the speaker pairs and the dim function
Activating the Artist Mode and Talk switch

Crossfeed
Adjusting the crossfeed when Phonitor Matrix is activated

Headphone Volume 1 & 2
Independent volume control for two headphones

Monitor Mix
Creation of a monitoring mix between the analog inputs and the analog & digital sources/DAW

Phonitor Matrix

Enables correct mixing on headphones
Removes the super stereo effect
Calculates the interaural levels and time differences

Volume
Control for the loudspeaker monitoring volume

The Revolution
in the headphone amplifier is the Phonitor Matrix, with adjustable crossfeed, thanks to which you can create mixes with headphones that sound the same on speakers.

The Phonitor Matrix in its largest expansion stage has three setting parameters: Crossfeed, Speaker Angle and Center Level.

In the Crimson 3, the center level is preset to -1 dB and the speaker angle to 30°. These are the most commonly used values.

The crossfeed function determines the crosstalk of the channels, the so-called interaural level difference. The intensity of the crossfeed is fully variable.

Microphone Input; XLR (balanced)

Maximum input gain (Gain fcc)14.5 dBu Input impedance10 kΩ Frequency range (-3 dB)20 Hz – 200 kHz THD + N (10 Hz – 22 kHz, 30 dB)0.003 % Noise (A-weighted, 150 Ω, 30dB)-94 dBu E.I.N. (150 Ω)-128 dBu Common mode rejection (1 kHz)70 dB

Instrument Input; 1/4", 6.3mm TRS Jack (balanced)

Maximum input gain (Gain fcc)24 dBu Input impedance1,1 MΩ Frequency range (-3 dB)20 Hz – 200 kHz THD + N (10 Hz – 22 kHz, 1:1 Gain)0.005 % Noise (A-weighted, 1:1 Gain, 100 Ω)-89 dBu

Line/Source Preamplifier; 1/4", 6.3mm TRS Jack (balanced), RCA, 3,5mm Mini-Jack

Maximum input gain22.5 dBu Input impedance (balanced)20 kΩ Input impedance unbalanced)10 kΩ Frequency range (-3 dB)10 Hz – 200 kHz THD + N (10 Hz – 22 kHz, 0 dBu)0.002 % Noise (A-weighted, 600 Ω)-95 dBu Common mode rejection (1 kHz)-60 dBu

Speaker Output A (XLR, balanced) & B (1/4", 6.3mm TRS Jack, balanced)

Maximum output gain22.5 dBu Output impedance (balanced)150 Ω Output impedance (unbalanced)75 Ω Volume control range-78 dB – 0 dB

Headphone Amplifier; 1/4", 6.3mm TRS Jack (balanced)

Pin WiringTip = L, Ring = R, Sleeve = GND Output impedance33 Ω Frequency range (-3 dB)10 Hz – 200 kHz Max output power (600 Ω)150 mW Max output power (300 Ω)265 mV Max output power (470 Ω)670 mW THD + N (10 Hz – 22 kHz, 0 dBu, 47 Ω)0,0026 %

DA converter (ASIO direct)

Noise (44.1/48 kHz sample rate)-109 dBFS Noise (88.2/96 kHz sample rate)-107 dBFS THD + N (44,1/48 kHz, -15 dBFS, 10 Hz – SF/2)0.0022 THD + N (44,1/48 kHz, -1 dBFS, 10 Hz – SF/2)0.0014 THD + N (88,2/96 kHz, -15 dBFS, 10 Hz – SF/2)0.0025 THD + N (88,2/96 kHz, -1 dBFS, 10 Hz – SF/2)0.0032 Dynamic range (44.1/48 kHz sample rate)109 dB Dynamic range (88.2/96 kHz sample rate)107 dB Sample rates44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz 0 dBFS calibrated to15 dBu

AD converter (ASIO direct)

Noise (44.1/48 kHz sample rate)-113 dBFS Noise (88.2/96 kHz sample rate)-110 dBFS THD + N (44,1/48 kHz, -15 dBFS, 10 Hz – SF/2)0.002 % THD + N (44,1/48 kHz, -1 dBFS, 10 Hz – SF/2)0,001 % THD + N (88,2/96 kHz, -15 dBFS, 10 Hz – SF/2)0.0016 % THD + N (88,2/96 kHz, -1 dBFS, 10 Hz – SF/2)0,001 % Dynamic range (44.1/48 kHz sample rate)113 dB Dynamic range (88.2/96 kHz sample rate)110 dB Sample rates44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz 0 dBFS calibrated to15 dBu

Internal Power Supply

Operating voltage for analog audio+/- 17 V Operating voltage for digital audio+5 V, +3.3 V Phantom power+ 48 V Power consu mption16.8 W

External Power Supply

AC/DC switching adapterMean Well GE18/12-SC DC plug(+) pin 2.1mm; (-) outside ring 5.5mm Input voltage100 - 240 V AC; 50 - 60 Hz; 0.7 A Output voltage12 V DC; 1.5 A

Dimensions & Weight

W x H x D (width x height x depth)330 x 67 x 212 mm Unit weight2.8 kg Shipping weight (incl. packaging)4 kg