CK-1
CK-1
CK-1
CK-1
CK-1
CK-1
CK-1

Avantone - CK-1

Prix FFWD 185 €
AVAN43766A
Disponible immédiatement

Disponible immédiatement
Réglez de manière sûre et sécurisée par Ingenico ou virement bancaire
Réglez de manière sûre et sécurisée par Ingenico ou virement bancaire

 

The Avantone "Cabernet (C-series)" mics are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics. The Avantone CK-1 is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to fine studio-standard FET micsbut at a fraction of their cost!
Our rugged CK-1 microphone body and capsule assembly are precision machined of brass. Aesthetically, it features an elegant Cabernet Wine-Red finish, accented with polished nickel trim and capsule assembly.
The CK-1 in its normal stock version uses high grade Polystyrene and Metalized Polypropylene capacitors in the audio path. This represents our commitment to quality as these normally are the type of "upgrade" components that are implemented by microphone modder/hot-rodders!
The high quality FET circuitry will yield pleasing professional results comparable to much more expensive designs. Any studio can proudly offer the CK-1 for instrumental and percussion mikingIt exudes class visually as well as sonically. The CK-1 is equally at home on the stage for drum overheads, acoustic instruments and piano.
The design, character and performance can be compared directly to fine studio-standard FET micsbut at a fraction of their cost! The CK-1 includes (3) 19mm (3/4") interchangeable capsules to provide unlimited miking possibilities! Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability. The rugged CK-1 mic is able to produce professional results with a clean sonic character.
The included SSM Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results. The 3 capsules (cardioid, omni, and Hyper-cardioid) offer versatility for accommodating virtually any miking task.
The CK-1 has separate -10 dB pad & 80 Hz LF roll off switches....The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics. The 80Hz high-pass filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from "muddying up" the track.

Type True Condenser
Polar Pattern(s) Cardioid , Hyper-Cardioid & Omni Capsules included
Capsule Single-sided 32mm center-terminated gold-sputtered Mylar (6 micron)
Frequency Response 25-20,000 Hz +/- 3dB
Output Impedance <=200 Ohms
Sensitivity 15mv/pa
S/N Ratio 1Pa 78dB
Noise Floor < 17 dBA
Maximum SPL 138dB (0.5% THD @1000Hz)
Equivalent Noise Level <17dB
Output Connector Male XLR 3-pin
High-Pass Switch 80 Hz 6dB/octave
Attenuation Switch -10 dB
Power Requirement Standard 48 Volt Phantom / 5mA
Included Accessories 3 Capsules
Padded Wooden Box
SSM Shockmount
Dimensions 23mm x 153mm
Weight 5 oz
Finish Polished Nickel trim / Metallic Cabernet Red Body

12 autres produits dans la même catégorie :