ASP880
ASP880
ASP880
ASP880
ASP880

Audient - ASP880

Prix FFWD 890 €
AUDI0EA762
Sur commande

Date non communiquée
Réglez de manière sûre et sécurisée par Ingenico ou virement bancaire
Réglez de manière sûre et sécurisée par Ingenico ou virement bancaire

 

ASP880 is an audio powerhouse designed with expandability in mind, making it the perfect addition to your audio interface. Upgrade your current setup with 8 channels of Audient’s Console mic preamps, 8 line inputs/outputs, 8 insert points, class leading converters and two JFET D.I’s – all in a compact 1RU package.

  • 8 x Audient Mic Pres
  • 8 x ADC Line Inputs / Insert Points
  • 2 x JFET Instrument Inputs
  • Digital Outputs ADAT , AES + S/PDIF

More channels, more possibilities
ASP880 is the perfect tool for expanding your existing interface. Add 8 channels of Audient mic pre via ADAT and transform your current setup into the complete recording rig.

8 more channels
Add professional quality mic pres to your rig by expanding your existing audio interface.

Take on bigger sessions
Confidently take on full band sessions or those projects that were out of reach.

Easily record drums
ASP880 gives you more than enough channels to comfortably take on drum recordings.

The professional sound you deserve
Tackle any project with the renowned Audient Console Mic Preamp, the same discrete circuit design found in our renowned recording console the ASP8024-HE. Designed to deliver ultra- low noise and low distortion with a touch of classic analogue warmth, ASP880’s eight Audient Console mic pre’s will give you the professional sound you deserve.

How does it sound?
The Audient mic pre is a high grade hybrid discrete and op amp design that delivers a clean, accurate and detailed translation of your source.

Now that’s quiet
With a noise floor 30,000 times quieter than the signal level your recordings will be captured with stunning clarity.

60dB Gain Range
Clean, quiet and punchy

Phantom Power
Give your mics the power they need

-10dB Pad
Keep headroom on loud sources

Polarity Reverse
Make sure everything is in-phase

Integrate your outboard
Easily integrate outboard FX such as EQ and compression before the analogue to digital converter. Letting you record using your favourite outboard gear.

Clarity where you need it
Confidently capture your microphones and line level instruments with ASP880’s class leading converter technology. By providing the cleanest signal path possible, ASP880 makes sure you capture every nuance, every detail of your audio, letting you focus on getting the most from your session.

More than meets the eye
ASP880 lets you bypass the mic pres and converters in your current interface and achieve the same audio excellence as the top studios.

Using the ADC Inputs, ASP880 can operate as a standalone A-D converter, allowing you to feed the ADC from other sources such as alternative mic pres.

Plug and play
As well as offering you 8 channels of Audient mic pre, ASP880 has two harmonically rich JFET D.I inputs. Designed to replicate the input stage of a classic valve amplifier, you can plug your guitar, bass, keyboard or drum machine straight in and start recording instantly.

Versatile simplicity

Variable Impedance
Variable Impedance enables you to match the impedance of the mic pre to your favourite ribbon mic, letting you retain the punch and frequency response the mic was born with. It also works on your other mics, just more subtly.

Variable High Pass Filters
Take control of your signal with the Variable HPF. Remove unwanted low frequencies, prevent proximity effect and tighten up your low end with a range of 25Hz to 250Hz. The result is a clean, ready to record signal.

Microphone preamplifiers:
MIC GAIN: -10 to +60dB (-10dB Pad)
LINE GAIN: -16 to +44dB (-10dB Pad)*
PHANTOM POWER: 48v +/-4v @ 10mA/Channel
MIC EIN: <-127.5dBu
CMRR: >80dB @ 100 to 10kHz
MAXIMUM INPUT LEVEL: +22dBu (+32dBu with Pad)
INPUT IMPEDANCE: Mic LO: 220Ω Balanced, Mic MED: 1k2Ω Balanced, Mic HI: 2k8Ω Balanced, Line (All Z): >6kΩ Balanced
FREQUENCY RESPONSE: +/-0.5dB 10Hz to 100kHz
CROSSTALK: <-85dBu @ 1kHz & 10kHz
THD+N @ 0dBu (1kHz): 0.003% (-90.5dBu)
SNR: >90dB
HPF: Sweepable from 25Hz to 250 Hz, 2nd Order (12dB/Octave)
XLR: Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield)
1/4” JACK: TIP (Hot), RING (Cold) & SLEEVE (Shield)
Discrete JFET D.I (Channels 1 & 2)
D.I GAIN: -10 to +60 dB (-10dB Pad)
MAXIMUM INPUT LEVEL: +16dBu (typical), +22dBu
INPUT IMPEDANCE: 1MegΩ Unbalanced
FREQUENCY RESPONSE: +/-0.5dB 10Hz to 50kHz
THD+N @ 0dBu (1kHz): <0.03% (-70dBu)
SNR: 89dB
1/4” JACK: TIP (Hot) & SLEEVE (Shield)
Line Outputs (Insert Sends):
MAXIMUM OUTPUT LEVEL: +27.5dBu
OUTPUT IMPEDANCE: <100Ω Balanced
ADC Line Inputs (Insert Returns):
MAXIMUM INPUT LEVEL: +18dBu
DIGITAL REFERENCE LEVEL: 0dBFS = +18dBu
DINPUT IMPEDANCE: >10kΩ Balanced
FREQUENCY RESPONSE: +/-0.5dB 10Hz to Fs/2
CROSSTALK: <-80dBu @ 1kHz & 10kHz
THD+N @ -1dBFS (1kHz): <0.002% (-94dB)
THD+N @ -6dBFS (1kHz): <0.002% (-94dB)
DYNAMIC RANGE: 113dB un-weighted, 115dB A-weighted
PEAK LED LINEUP: +16dBu (-2dBFS)
SIGNAL LED LINEUP: Variable Brightness from -30dBu to -10dBu (-28dBFS)
Digital i/o:
ADAT 8 CHANNELS SMUX: 44.1 – 96kHz
AES | S/PDIF 8 CHANNELS: 44.1 – 96kHz
CLOCK: Internal or External
WORLDCLOCK INPUT: 75Ω BNC, Optional 75Ω Termination
Power Supply:
High stability, low noise internal SMPS
Fan-less, quiet operation
Works anywhere in the world without reconfiguring
LINE VOLTAGES: 90 to 264V (a.c)
INTERNAL RAILS: +/-18VDC, +48VDC & +5VDC
FUSE: T1A (1Amp Time Delay)
CONSUMPTION: Maximum 40 Watts
WEIGHT: 4.0kg

12 autres produits dans la même catégorie :