ROADBUDDY 10 HBH 2 B6
LD Systems - ROADBUDDY 10 HBH 2 B6

LD Systems - ROADBUDDY 10 HBH 2 B6

Prix FFWD 955 €
LDSY232B1B
Sur commande

Contactez-nous
Réglez de manière sûre et sécurisée par Ingenico ou virement bancaire
Réglez de manière sûre et sécurisée par Ingenico ou virement bancaire

 

The LD Systems Roadbuddy 10 is an elegant solution for voice and music transmission on the go. The 2-way speaker with a 10" custom woofer and a 1" compression driver is operated with a rechargeable battery for up to 8 hours and is powered by a class D power amplifier with a highly efficient switching power supply and 480 watts of peak power.
The Roadbuddy relies fully on wireless transmission: it has an UHF radio receiver which operates with 655 - 679 MHz range. The on-board Bluetooth player with backlit multifunction display ,equalizer, USB port and SD card slot supports the mp3, wma and wav formats. Two handheld microphone with 10 mW output power(LDRBUD10HHD2B6), two headset microphones with belt pack (LDRBUD10BPH2B6) or as an alternative a handheld microphone and a headset microphone with belt pack (LDRBUD10HBH2B6) and an IR-remote control for the player are included.
For wired devices, the Roadbuddy has two channels with combo jacks and individual volume controllers that are switchable for microphone and line level, a stereo input via RCA (Cinch) sockets (mono summed) and a 3.5 mm Aux input. Treble, Bass, Echo and Master volume controllers complete the control panel.
The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle. On the top, there is a handy storage compartment for up to two hand-held transmitter microphones. The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.

Référence: LDRBUD10HBH2B6
Type de produit: Haut-parleurs sur piles
Diamètre boomer/médium: 10"
Diamètre Boomer: 254mm
Aimant boomer: Ferrite
Marque boomer: Sur mesure
Diamètre tweeter: 1"
Diamètre Tweeter: 25,4mm
Aimant tweeter: Ferrite
Marque tweeter: Sur mesure
Amplificateur: Classe D
Puissance (efficace): 120W
Puissance (crête): 480W
Réponse en fréquence: 55 - 18000Hz
Niveau de pression sonore (pour 1 W à 1 m): 96dB
Niveau de pression sonore maximal: 115dB
Circuits de protection: surcharge, Surtension, Court-circuit
Réglages: CD / Tape IN Level, Mic 1 Level, Echo, sélecteur AUX / MP3, Graves, High, Mic 2 Level, Volume général
Indicateurs: Indicateur de charge / batterie, Power
Lecteur de médias
Médias reconnus: Bluetooth, Clé USB, Carte SD
Formats reconnus: Fichiers MP3, Fichiers WMA, CD avec fichiers WAV
Contrôles lecteur médias: Égaliseur, Stop, Play / Pause, Plage précédente, Plage suivante, Mode (Menu / Bluetooth /SD / USB), Repeat
Indicateurs lecteur médias: Écran LCD multifonctions rétro-éclairé
Entrées ligne: 1
Connecteurs d'entrée ligne: Mini-Jack 3,5 mm, 2 x XLR, Jack 6,35 mm, 2 x Cinch (RCA)
Entrées micro: 2, Jack 6,35 mm, 2 x XLR
Récepteur HF
Transmission frequency range: 655 - 679MHz
Type de modulation: FM
Canaux: 16
Réponse en Fréquence récepteur HF: 50 - 17000Hz
Contrôles récepteur HF: Power / Volume, Value Down, Niveau de Mute (Squelch), Value Up, ASC (scan automatique)
Indicateurs récepteur HF: indicateur audio (LED), RF (LED), écran LED
Connecteurs récepteur HF: nTNC pour antenne récepteur
Puissance d'Émission HF: 10mW
Poids du Micro/Émetteur à main: 0,285kg
Matériau du Micro/Émetteur à main: Aluminium
Poids d'émetteur ceinture: 0,08kg
Matériau d'émetteur ceinture: plastique ABS
Tension secteur: Bloc secteur, 220 V - 240 V AC / 50 Hz, 100 V - 120 V / 60 Hz
Batteries rechargeables: 12 V / 5 Ah
Matériau coffret: Polypropylène
Finition coffret: Bass Reflex
Largeur: 415mm
Hauteur (mm): 525mm
Profondeur: 328mm
Poids: 16,5kg
Autres propriétés: Embase pour pied, diamètre 36 mm, Poignée télescopique, Infrarouge pour lecteur de médias, poignée de transport, Roulettes de transport

12 autres produits dans la même catégorie :