Hors Stock Appeler pour vérifier Channel strips Empirical LabsEL-RX Docderr EMPI3565C9 1 320 € Frequency Response – 3 Hz to 180 kHz on eq section (-3dB points). Dynamic Range – 120 dB from maximum output (.5%THD soft clipping) to minimum output. Noise floor with Mix on 0 is typically – 91dBu. Distortion – between .0006% and 10% at 1KHz, depending on mode and settings. I/O – Maximum Input before hard clipping – +22dBm, “ Line In” mode.... Voir
Hors Stock Appeler pour vérifier E.Q.'s & De-essers Empirical LabsELQ Lil freq EMPI6E6EC7 3 200 € Freq. Response - 5 Hz to 140 kHz on transformerless inputs and outputs.Transformer Output response is 10 Hz to 110 kHz .Dynamic Range - 120 dB from maximum output (.1% clipping) to minimum output. Greater than 110 dB signal to noise.Distortion Ranges between .00056% and .005% depending on mode and settings. DS section has THD < .005%.DC coupled Input... Voir
Hors Stock Appeler pour vérifier E.Q.'s & De-essers Empirical LabsEL-DS Derresser EMPIFEABEE 625 € Frequency Response – 3 Hz to 120 kHz (-3dB points).Dynamic Range – 115 dB from maximum output (.5%THD soft clipping) to minimum output. Transformerless noise floor typically – 93dBu.Distortion – Ranges between .0035% and .01% depending on mode and settings. I/O – DC Coupled input and outputs. Input Balanced, Output single ended but with balanced... Voir
Hors Stock Appeler pour vérifier Préamplis Empirical LabsEL9 Mike-E EMPIABB194 2 900 € Freq. Response is 3 Hz to 200 kHz on (No CompSat). CompSat is 3Hz - 150Khz. Optional Transformer output is 6Hz-80kHz. Signal to Noise - 130 dB signal to Noise.at 40dB gain. Maximum output is +28dBu. Distortion Ranges between .0006% and 15% depending on mode and settings. Transformer coupled Input, Active and Transformer Outputs... Voir
Hors Stock Appeler pour vérifier Compresseurs gates limiteurs Empirical LabsEL8X Distressor EMPIB54DA9 2 000 € Freq. response is 2 Hz to 160 kHz in clean audio mode (+0, -3 dB). Response is shaped in distortion modes (Dist 2, Dist 3). Dynamic range 110 dB from max. output to min. output in 1:1 mode. Greater than 100 dB signal to noise in distort 3 mode. Distortion ranges between .02% and 20% depending on distortion mode and release times set on... Voir
Hors Stock Appeler pour vérifier E.Q.'s & De-essers Empirical LabsEL7X Fatso EMPI6A3AFF 2 890 € Freq. Response is 2 Hz to 60 kHz in clean audio mode (+0, -3 dB).Dynamic Range 110 dB from maximum output (20%THDsoft clipping) to minimum output. Greater than 100 dB signal to noise.Distortion Ranges between .06% and 20% depending on mode and settings.DC coupled Input and OutputsHigh quality audio caps used internally. Compressor Time Constants - Attack... Voir
Hors Stock Appeler pour vérifier Consoles Analogiques Trident68-24 TRIDC71B40 18 500 € Input Impedance Microphone: >2KΩ electronically balanced Line: >10KΩ electronically balanced Output Impedance Left/Right, Monitor O/P, Group and Auxes <50Ω All other Outputs <100Ω Frequency Response Mic Input to Mix Output... Voir
Hors Stock Appeler pour vérifier Consoles Analogiques Trident68-16 TRID6B5244 12 500 € Input ImpedanceMicrophone: >2KΩ electronically balanced Line: >10KΩ electronically balanced Output ImpedanceLeft/Right, Monitor O/P, Group and Auxes <50Ω All other Outputs <100Ω Frequency ResponseMic Input to Mix Output <+0, -0.3dB 10Hz to 55KHz @ 6-60 dB gain. Line Input to Mix Output <0, -0.3dB <100Hz to 60KHz @ 0 dB gain.... Voir
Hors Stock Appeler pour vérifier D.I. A-DesignsREDDI V2 ADESFC4885 1 200 € All-tube direct box with custom output transformers.Ultra wide frequency range (20Hz-60kHz).Neutrik input connectors, balanced XLR out, and 1/4" thru jack.Inspired by the Ampeg B-15.Clean and airy high end, warmth, transparency, and ultra high-quality sound.Level control.Ground lift.Red on/off Power Lamp.Zero-feedback loop design.Massive, custom-wound... Voir
Hors Stock Appeler pour vérifier Préamplis A-DesignsMP-2A ADESIG512L 2 850 € All-tube design. Selectable tone switches offer four sounds per channel. 60dB gain allows use of next-generation ribbon mics. EF86 input tubes/6N1P output tubes. Cinemag input transformers and custom-wound output transformers. True VU meters. Dual level controls. -20dB pad switch (per channel). Polarity switch (per channel). Toroidal power transformer.... Voir
Hors Stock Appeler pour vérifier E.Q.'s & De-essers A-DesignsEM-PEQ ADESIG510R 1 150 € The first and only Pultec-style equalizer in the 500-Series format. Three-band EQ with the same control layout as original Pultec.Fully balanced, noise-free performance and modern impedance specs. Same frequency settings and inductors as original Pultec make it a must-have for capturing bottom end.Excels at tracking, mixing and mastering—a truly... Ajouter au panier
Hors Stock Appeler pour vérifier Autres A-DesignsATTY ADESIG514A 110 € 100% passive line attenuator.Does not color or negatively affect sound quality.Convenient, one-knob stereo level control.Transparent, noise-free level control for any line-level source.Desktop powered monitor control.Super handy Mute/Panic button prevents speaker-damaging thumps or feedback.Prevent digital overs caused by high-output preamps.Control... Voir
Hors Stock Appeler pour vérifier E.Q.'s & De-essers TridentA Range 500 TRIDAA0F71 850 € Input impedance: 10kohm balanced Common mode rejection: 70dB Equivalent input noise: -85dBu (unweighted, no boost or cut) Distortion: 0.05% (+4dBu output, 1kHz) Frequency response: 20Hz to 20kHz (-1dB) Boost / Cut range: +/-15dB (variable) Filter Q value: 1.3 (1 octave) Maximum input level: +22dBu Max output before clip: +28dBu (10k load) Nominal... Voir
Hors Stock Appeler pour vérifier E.Q.'s & De-essers Trident80B-500 TRIDCDB974 475 € Four Band Eq Sweepable Mid Bands Lo Freq can be switched between 60 and 120Hz Hi Freq switchable between 8 and 12KHz Lo Mid sweepable from 100 to 1.5KHz Hi Mid sweepable from 1 to 15KHz 50Hz Hi Pass Switch Peak Overload LED Bypass Switch Ajouter au panier
Hors Stock Appeler pour vérifier E.Q.'s & De-essers TridentHi-Lo 500 Tracking Filters TRIDFUZ1OK 500 € Input Impedance 10 kilohms Max Input +27dBu Max Output +27dbu (Into 600ohms) Distortion (+10dBu Out) 0.0031% (20Hz to 20kHz) (Hi Enabled Max Freq) (Lo Enabled Min Freq) Distortion (+20dBu Out) 0.0069% (20Hz to 20kHz) Frequency Response 15Hz to 60kHz (-3dB) Noise (20Hz to 20kHz bandwidth limited) No Filters in... Voir
Hors Stock Appeler pour vérifier D.I. A-DesignsREDDI ADESIG512G 820 € All-tube direct box with custom output transformer. Ultra wide frequency range (20Hz-60kHz). Neutrik input connector, balanced XLR out, and 1/4" thru jack. Inspired by the Ampeg B-15. Clean and airy high end, warmth, transparency, and ultra high-quality sound. Level control. Ground lift. Ultra bright blue LED on/off lamp. Zero-feedback loop design.... Ajouter au panier
Hors Stock Appeler pour vérifier Préamplis A-DesignsPACIFICA ADESIG513V 1 980 € Two-channel, solid state preamp with two front-panel Hi-Z inputs.Captures the sound quality of the legendary Quad Eight Pacifica console with even more presence and high-end. Very warm and full tone without being dark; wide bandwidth with a sweet top end. Custom-wound Cinemag input and output transformers. Input transformer: A-Designs proprietary input... Ajouter au panier
Hors Stock Appeler pour vérifier E.Q.'s & De-essers A-DesignsEM-EQ2 ADESIG407W 2 750 € Dual mono, three-band band, Pultec-style EQ.Faithfully preserves the EQ section design, controls, and musicality of the Pultec EQP-1.Eminently suited for tracking, mixing, or mastering.Same frequency settings and inductors as original Pultec make it a must-have for capturing bottom end.Fully balanced, noise-free performance and modern impedance... Ajouter au panier