| SPECS |
| neck type |
SRMS4 for Multi Scale 5pc Maple/Walnut neck |
| top/back/body |
Okoume body |
| fretboard |
Panga Panga fretboard Off-set white dot inlay |
| fret |
Medium frets |
| number of frets |
24 |
| bridge |
MR5S bridge |
| string space |
19mm |
| neck pickup |
Fishman Fluence neck pickup Passive |
| bridge pickup |
Fishman Fluence bridge pickup Passive |
| equaliser |
Fishman 3-band EQ w/Single Coil Mode switch (push/pull), 3-way Voice Select switch |
| factory tuning |
1G,2D,3A,4E |
| strings |
D'Addario EXL170SL |
| string gauge |
.045/.065/.080/.100 |
| hardware color |
Black |
| NECK DIMENSIONS |
| Scale : |
876mm/34.5 - 851mm/33.5" |
| a : Width |
38mm at NUT |
| b : Width |
62mm at 24F |
| c : Thickness |
19.5mm at 1F |
| d : Thickness |
23mm at 12F |
| Radius : |
305mmR |
 |
DESCRIPTION :
Guitar Neck Diagram
a: Width of the neck at the nut
b: Width of the neck at the fret position specified by the neck dimension
c: Thickness of the neck at the first fret
d: Thickness of the neck at the fret position specified by the neck dimension
Radius: Radius of the fingerboard
|
| CONTROLS |
 |
DESCRIPTION :
With the bass held in the playing position, there are three small knobs closest to the lower edge of the body.
Directionally, from the lower bout towards the neck, these knobs are treble boost/cut, mid boost/cut, and bass boost/cut.
There are two larger knobs above these, closer to the bridge.
The knob closest to the neck controls volume, and the knob next to it is the pickup balancer control. The volume knob can be pulled to Single Coil mode.
There is a 3-way voice selector switch next to the balancer knob.
When the switch is in neck position, Voice 1 is engaged.
When the switch is in center position, Voice 2 (Mid Contour) is engaged. When the switch is in bridge position, Voice 2 is engaged.
|
| FREQUENCY RESPONSE |
 |
DESCRIPTION :
The bass boost/cut frequency curve has a peak at 55 Hz, the variable width decreases toward the high range, and the variable width becomes zero at about 1,000 Hz.
The variable range becomes slightly larger in the high range at around 1,000 Hz, but it becomes zero again near 7,000 Hz. The variable range of the peak frequency is approximately ±12 dB.
The treble boost/cut frequency curve draws a mountain-shaped curve with a peak at around 7,500 Hz and zero variable width around 400 Hz.
The variable range becomes slightly larger in the row range at around 400 Hz, but it becomes zero again near 70 Hz.
The variable range of the peak frequency is approximately ±10.4 dB.
The mid-boost/cut frequency curve creates a mountain-shaped curve with a peak around 630 Hz, and the variable width becomes zero near 20 Hz and around 7,000 Hz. The variable range of the peak frequency is approximately ±9 dB.
|
| OTHER FEATURES |
| Recommended Case |
MB300C
Recommended Bag
IBB540-BK
Graph Tech RATIO machine heads |
