Back in the ’90s, our HR Series studio reference monitors revolutionized studio monitoring. With their incredible sound quality and affordability, they earned a wide and loyal following, fast becoming the industry standard. Today’s studio demands a monitor that can reproduce sound as precisely as it is recorded. The same innovation that launched our pioneering HR Series has led to the birth of just such a monitor as well as a new studio standard. Meet the HRmk2.
Features
ZERO-EDGE BAFFLE™
The one-piece cast aluminum Zero Edge Baffle™ features precisely engineered curvature that minimizes diffraction for a crystal clear image of your mix, and effectively controls sound waves so you get detailed lows, full, articulate mids, and shimmering highs.
PASSIVE RADIATOR
The passive radiator replaces the port found on most speaker systems. One primary advantage of a passive radiator is that it can reproduce low frequencies with lower distortion and at a higher sound pressure level (SPL) than a simple port or duct.
PRECISION AMPLIFICATION
The HRmk2 Series monitors contain separate onboard amplifiers for each driver, plus onboard active crossovers and time-correction circuitry, which helps ensure highs and lows reach your ears at the same time. The HRmk2s also have protection circuitry built in to protect from damaging input levels.
CABINET DESIGN
The HRmk2 monitors feature a wood cabinet, with custom internal bracing to increase its strength and rigidity in desired locations. To absorb internal reflections and dampen standing waves inside the cabinet, an open-cell adiabatic foam material is placed strategically inside the box.
UNPARALLELED QUALITY
We go to elaborate lengths to ensure each HRmk2 sounds as good as our experts intended. Each one we manufacture is subject to rigorous testing and pre-screening during the production process, then calibrated and tuned with an environmentally controlled test chamber before final packaging.
POWER AND OVERLOAD LED
Our LED power indicator is a tasty shade of white and red for when things get pushed a little too hard. We took care to make sure the brightness is just right, too. The light shines bright enough so you can see it just fine in a well-lit room, and in a dark environment, it won’t distract or blind you.
ROTATABLE LOGO
Due to their ultra-wide sweet zone, our HRmk2 monitors can be oriented vertically or horizontally, so we made our Mackie logo rotate-able. No matter which way you orient your HRmk2s, they’re always right-side up!
FOR STUDIOS AND BEYOND
With their versatility and flexibility, the HRmk2 Series monitors are perfect for a wide variety of applications. Whether you need an ultra-accurate monitoring setup for your studio, or you want to add premium sound to your home theatre or gaming system, the THX pm3 approved HRmk2 Series delivers ultimate performance and sound quality that’s ideal for just about any room or setup. And because the HR624mk2 and HR824mk2 monitors share the same design, they function great together, making them optimal for surround systems.
Haut-parleurs | |
---|---|
Woofer | |
Diamètre | 17 cm (6,7 pouces) |
Sensibilité (2,83 V, 1 m) | 89 dB SPL |
Impédance nominale | 4 Ω |
Diamètre de bobine | 32 mm (1,25 pouce) |
Puissance admissible (long terme/programme) | 50/150 Watts |
Réponse en fréquence | 45 Hz à 6 kHz |
Saladier | Magnésium moulé |
Aimant | Ferrite |
Blindage | Aimant opposé (en ferrite) |
Tweeter | |
Sensibilité (2,83 V, 1 m) | 91 dB SPL |
Impédance nominale | 6 Ω |
Puissance admissible (long terme/programme) | 20/50 Watts |
Réponse en fréquence | 1,6 kHz à 22 kHz |
Membrane/Suspension | Titane avec suspension en polymère |
Diamètre de bobine | 2,54 cm (1 pouce) |
Aimant | Néodyme |
Aimant auxiliaire | Aimant opposé (en ferrite) |
Radiateur passif | Piston plat de forme elliptique de 15,2 cm (6 pouces) sur 22,8 cm (9 pouces) avec suspension en caoutchouc filé à épaisseur variable. |
Section du filtre actif | |
---|---|
Type de filtre | Linkwitz-Riley modifié, 24 dB/octave à 3 kHz |
Section d'amplification de puissance | |
---|---|
Amplificateur - Basses fréquences | |
Puissance nominale (à 1 kHz avec 1 % de DHT) | 100 Watts |
Impédance nominale | 4 Ohms |
DHT nominale (puissance nominale : 1 W à –1 dB) | 0,1 % |
Temps de montée | 15 V/µS |
Distorsion (DHT, intermodulation SMPTE, DIM 100) | < 0,035 % |
Rapport signal/bruit (20 Hz-20 kHz, mesure non pondérée, référence : 100 W dans 4 Ω) | > 101 dB |
Refroidissement | Convection |
Conception | CI monolithique, Classe AB, Dispositif de correction |
Amplificateur - Hautes fréquences | |
Puissance nominale (à 1 kHz avec 1 % de DHT) | 40 Watts |
Impédance nominale | 6 Ohms |
DHT nominale (puissance nominale : 1 W à –1 dB) | 0,1 % |
Temps de montée | 15 V/µS |
Distorsion (DHT, intermodulation SMPTE, DIM 100) | < 0,035 % |
Rapport signal/bruit (20 Hz-20 kHz, mesure non pondérée, référence : 40 W dans 8 Ω) | > 93 dB |
Refroidissement | Convection |
Circuits | CI monolithique, Classe AB |
Caractéristiques du système | |
---|---|
Entrées | Symétriques (XLR et Jack stéréo 6,35 mm) Asymétrique (RCA) |
Impédance d'entrée | 20 kΩ symétrique 10 kΩ asymétrique |
Protection d'entrée | Circuit contre les interférences |
Niveau d'entrée max. | +20 dBu |
Filtre coupe-bas | 80 Hz, Butterworth de deuxième ordre |
Filtre aigu | Baxendall, ±2 dB à 10 kHz |
Sélecteur Acoustic Space | Position A : –4 dB à 50 Hz, Baxendall Position B : –2 dB à 50 Hz, Baxendall Position C : plat |
Compresseur | Détection de surcharge indépendante pour les graves et les aigus |
Alignement de l’enceinte | 6e ordre |
Filtre passe-haut | 2e ordre |
Interruption de la tension | 60 % de la tension nominale |
Protection thermique | Désactivation de l’amplificateur, réactivation automatique |
Temporisation | 5 secondes à la mise sous tension |
Seuil d’activation | –74 dBu (0,155 mV) |
Protection | Détection indépendante pour les graves/aigus, Compression globale |
Section acoustique | |
---|---|
Bande passante en champ libre | ±1,5 dB, 49 Hz à 20 kHz |
Fréquence de coupure inférieure | –3 dB à 45 Hz |
Fréquence de coupure supérieure | –3 dB à 22 kHz |
Niveau de pression sonore (SPL) à 1 m, –7,5 dBu, entrée symétrique | 100 dB SPL à 1 m |
Niveau crête maximum par paire | 115 dB SPL à 1 m |
Niveau SPL maximum sur axe,demi-espace, 80 Hz à 2,5 kHz | 106 dB SPL à 1 m |
Bruit résiduel (gain maximum, source : 600 Ω, bande passante : 20 Hz-20 kHz) | < 8 dB SPL à 1 m |
Tension et puissance nominales | |
---|---|
Consommation électrique | |
Mode Standby | 12 Watts |
Inactif | 20 Watts |
Programme musical, niveau élevé | 105 Watts |
Deux canaux sur charge résistive à 1 % de la surcharge (Woofer : 86 W/4 Ω, Tweeter : 38 W/8 Ω) | 255 Watts |
Europe | 240 Vca, 50 Hz |
Puissance nominale (UL-6500, CSA-E65-94, EN-60065) | 130 Watts |
Caractéristiques physiques | |
---|---|
Hauteur | 33,3 cm |
Largeur | 21,9 cm |
Profondeur du baffle | 26,2 cm |
Profondeur totale | 31,9 cm |
Volume interne | 8,2 litres |
Poids | 10,6 kg |