Representing over two years of research, development and field testing, our Sontronics DM-1B for kick drum and our pencil condensers (DM-1T for tom and DM-1S for snare) take Sontronics further into application-specific miking.
The DM-1B is a large-diaphragm, end-fire condenser microphone that has been designed specifically to capture and reproduce the various characteristics of a kick drum: the beater click, the heavy thump, the boomy decay and so on.
It has a switchable -15dB pad that allows the microphone to deal with a whopping 155dB, and its sturdy build plus the aluminium flightcase mean it will perform equally well in the studio and in live applications.
The DM-1B and our other drum mics were all tested to destruction before launch, by various session drummers, live musicians and producers, including Flood (U2, Killers, Arctic Monkeys) who found that the DM-1B also gives excellent results on bass instruments, especially bass guitar cabs.
Polar pattern | Cardioid |
Pad | 0dB, -15dB |
Frequency response | 20Hz - 20kHz |
Sensitivity | 6mV/Pa -45dB ±2dB (0dB = 1V/Pa @ 1,000Hz) |
Impedance | ≤200 Ohms |
Equivalent noise level | 14dB (A-weighted) |
Max. SPL (for 0.5% THD @ 1,000Hz) | 155dB (with -15dB pad switched in) |
Power | Phantom power 48V required |
Connector | 3-pin XLR |
Weight | 804g |
Dimensions | 144 x 72 x 72mm |
Comes with | aluminium flightcase |